Dis mekan için mükemmel çözümler!
- Place the male part on top of the female part and click down.
- Lift the tile on the male side and insert the female part from the underneath until you hear they snap together.
- Give the whole flor a coat of our special oil using a brush after fitting
- To remove the floor, use a small screwdriver and lift one of the squares taking care not to lever up the screwdriver too much. Now simply lower the plate so the squares comes off.
The tiles are furnished ready for the fitting. Its necassary to apply a coat of our special oil using a brush after fitting; if there is no application the wood takes an appearance grey/golden.
